Call us for a fast response for emergency callout requests and to book a fuel injector removal at a time to suit you.

If you’re visiting this page, then it’s likely there is a fault with your diesel injector when attempted to be removed for replacement or servicing.

Our technicians are highly trained and well experienced to resolve stuck injector issues. Rest assured that all our work is guaranteed and we’ll always have a solution to your seized or stuck diesel injector.

Injectors used on diesel engines equipped with common rail injection systems are very often found to be stuck in cylinder heads from various reasons including:

  • Excess water ingress between the injector and cylinder head sometimes caused by poor manufacturer design resulting in corrosion build-up of both of injector body and cylinder head’s material.
  • Injector seal failure causing excessive carbon build-up between injector and cylinder head.
  • Over time, a difference in temperature from the running engine to stationary engine and air moisture will cause corrosion build-up.

Whatever your situation is, here at OGS Mechanics we can help and have custom built equipment to cover almost all possible scenarios.

Over the years we have worked on many seized injectors because of poor manufacturer design, seal failure, normal wear and corrosion, or due to attempted removal by someone else.

If your diesel fuel system requires maintenance including injector removal, then specialist equipment and technicians are required.

It’s Always Cheaper to Have the Job Done Right First Time. Unsuccessful Attempts can Cause More Damage and Cost More to be Rectified

We offer a complete service including diagnosing your diesel fuel injection problem, extracting and replace faulty injector(s) and reprogramming of new diesel injector(s) on-site at our premises. Our mobile service provides the specialist service of extracting seized diesel injectors either with a hydraulic puller or by drilling with a 100% success rate.

Common vehicles affected by seized or corroded diesel injectors are:
Mercedes equipped with CDI engines, BMW’s, Peugeot, Citroen, Renault, Ford, Mazda, Nissan, Vauxhall, Volvo, Honda

Most Requested Engine Codes:
F9Q – 1.9 dCi / M9R – 2.0 dCi / G9T – 2.2 dCi / G9U – 2.5 dCi / N22A – 2.2 I-CDTi / N22B – 2.2 i-DTEC / DW10 – 2.0 JTD / DW12 – 2.2 HDI

Below is a list of diesel engine codes we can work with, and this list is always expanding. Please contact us with your vehicle make and model and we’ll be happy to assist:

Nissan

Primastar dCi – 1.9, 2.0, 2.5

NV400 dCi – 2.2, 2.3, 2.5

Honda

Accord I-CDTi / I-DTEC – 2.2

Civic I-CDTi / I-DTEC – 2.2

FR-V FRV I-CDTi / I-DTEC – 2.2

CR-V CRV I-CDTi / I-DTEC – 2.2

Kia

Sedona CRD – 2.2, 2.9

Fiat

Ulsee HDI – 2.0, 2.2

Vauxhall

Vivaro dCi – 1.9, 2.0, 2.5

Movano dCi – 2.2, 2.3, 2.5

Renault

Traffic dCi – 1.9, 2.0, 2.5

Master dCi – 2.2, 2.3, 2.5

Megane dCi – 1.5, 1.9, 2.0

Kangoo dCi – 1.5, 1.9, 2.0

Kubistar dCi – 2.2, 2.3, 2.5

Chrysler

Grand Voyager CRD – 2.5

Citroen

C8 HDI – 2.0, 2.2

Ford

Transit 2.2 tdci

Focus 1.6 tdci

Mercedes

Sprinter CDI – 2.1, 2.3, 2.7, 3.0

E200/E220/E270/E320 CDI – 2.1, 2.3, 2.7, 3.0

Vito CDI – 2.1, 3.0

Peugeot

807 HDI – 2.0, 2.2

Volvo

S40 S60 S80 V50, V60, V70, XC60, XC90 – 1.6, 2.0D, 2.4 D5

Call us today and we’ll happy to assist.

WE HAVE A SOLUTION FOR ANY STUCK OR SEIZED DIESEL INJECTOR.